In today’s post, we are going to tell you; what is the best waterproofing method for basement walls? Seepage reaching the basement is not a good sign. Usually, there are two possible ways the seepage spread in a home, either it comes from the roof above or from the basement. Most people ignore the seepage or wet basement walls just because it is the basement. The terrifying fact about the seepage is that it spreads like mold and eventually it becomes almost impossible to even find the source. The following steps can devise a powerful method to track down the issue and improve it from its core.
Find out the core issue
This is probably the toughest thing to do. Because if you just start noticing the wet patches or mold on your basement wall, for you it is the start of the problem. In reality, the problem would have started long ago and it just starting showing up strong signs of the issue. To locate the place by any possible means to put a stop to it. If your water bills are normal, then you must inspect the drainage system.
Locate and seal the cracks in the walls
One of the most evident structural issues that facilitate the moisture is the cracks in the wall. Usually, the water or moisture use these cracks or porosity of material to travel. A crack-less wall is the most effective defense against unusual moisture because the porosity in the cracks is higher than the outer surface of walls. So, make sure you get them fixed up instantly. Visit We-Fix-Cracks For Basement Waterproofing Services In Connecticut & New York!!!
Improve the drainage system of the building
By improving the cracks, you saved your basement walls from damage, but the core issue might still be at large. You need to consider every possibility and improving the drainage system of the building would be a good start. Make sure you keep your gutters clean all the time and check the underground piping for possible damages as well.
Make sure the sunlight and air reach your basement
You would have often noticed that the basements are quite cooler as compared to the other parts of a building. The reason is that the sunlight doesn’t even reach that deep in a building, and people ignore the ventilation as well. This eventually becomes problematic, so to avoid moisture in walls make sure that sunlight and air both reach your basement.
While you are taking on the challenge of seepage in walls all by yourself, don’t forget that a professional structural expert can be hired for help. The initial moisture problem in walls can be tackled with a personal effort, but for complex issues, you should talk to a professional.